Penstock Valve

1.Corrosion resistance: acid and alkali resistance and most of the corrosive chemicals and sewage, seawater;

2. Good sealing performance: the rubber is used to seal metal, and the water stop rubber ring is hollow structure with good sealing performance;

3. Small torque: for the light weight of the door plate, the friction resistance between the door plate and the guide rail is small, so the operating torque of the hand wheel is not greater than 100N；

4. Independent structure: reliable temperature and rigidity welding structure, high-performance seals ensure the effective opening and closing of the gate, independent seal and wedge design make the gate more reliable, and can be subject to large reverse water level;

5. Long service life: because the door plate and the guide rail only contact with the last small section of sealing, the sealing wear is very small; The service life of stainless steel gate is more than 10 years, and that of carbon steel gate is more than 5 years;

6. Convenient maintenance: the wedge block can be adjusted.

1.The penstock gate can be made according to user's requirements

2. Corrosion resistance: acid and alkali resistance and most of the corrosive chemicals and sewage, sea water, etc.

3. Bi-directional sealing, good sealing performance

1.The penstock gate can be made according to user's requirements

2. Corrosion resistance: acid and alkali resistance and most of the corrosive chemicals and sewage, sea water, etc.

3. Good sealing performance: soft rubber seal is adopted, and the water stop rubber ring is hollow structure, with good sealing effect

1. Simple installation, solid structure, space saving; simple operation and maintenance, reduce operating costs，Strong corrosion resistance.

2.The body and frame are made of cast iron, and the water stop surface is inlaid with copper alloy or stainless steel and other corrosion-resistant materials with strong corrosion resistance, which is especially suitable for sewage or sea water environment.

3.Where there are special requirements, nickel chromium alloy cast iron and other materials with stronger corrosion resistance can be used.

EXPERIENCE OF PENSTOCK
1.Jinbin had started the research and produce the penstock since 2004 and there are normal size cast penstock and all size of steel penstock.
2. Cast penstocks are used for many domestic projects, such as Tianjin port rain and waster water pump station, Panjin First sewage
water treatment, Tianjin drainage management project and China Metallurgical Group corporation sewage water treatment etc.
3.Steel penstocks are used for Heze Hongyuan water supply project, Bruneian sewage water treatment and Tangshan Joy fishing vallay project in 2016 etc.
3.All penstocks got the accept from the end users and no complaints.

The sluice gate is widely used in the pipe mouth where the medium is water (raw water, clean water and sewage), the medium temperature is ≤ 80 ℃, and the maximum water head is ≤ 10m, the intersection kiln shaft, sand settling tank, sedimentation tank, diversion channel, pump station intake and clean water well, etc., so as to realize the flow and liquid level control. It is one of the important equipment for water supply and drainage and sewage treatment.

Wall type penstocks is used in inlet and outlet of wall for open or close, and use anchor bolts to fix the penstock to the hole surface.

1.The Penstock Manufacturers is controlled by a mechanically operated spindle.

2.The Stainless Steel Penstock Valve can be operated automatically through the use of an actuator. This could be activated once specific set levels are reached. Therefore, removing the need for any human interaction.

3.The Stainless Steel Penstock Valve also seal a pipe on all 4 sides, this is something that stoplogs are unable to do.

1.The water penstock valve is controlled by a mechanically operated spindle.

2.The sluice valve can be operated automatically through the use of an actuator. This could be activated once specific set levels are reached. Therefore, removing the need for any human interaction.

3.The sluice valve also seal a pipe on all 4 sides, this is something that stoplogs are unable to do.

1.The sluice gate valve for water is controlled by a mechanically operated spindle.

2.The square penstocks valve can be operated automatically through the use of an actuator. This could be activated once specific set levels are reached. Therefore, removing the need for any human interaction.

3.The welding penstock valve valve also seal a pipe on all 4 sides, this is something that stoplogs are unable to do.