sluice gate

1.The penstock gate can be made according to user's requirements 2. Corrosion resistance: acid and alkali resistance and most of the corrosive chemicals and sewage, sea water, etc. 3. Good sealing performance: soft rubber seal is adopted, and the water stop rubber ring is hollow structure, with good sealing effect

1. Simple installation, solid structure, space saving; simple operation and maintenance, reduce operating costs，Strong corrosion resistance. 2.The body and frame are made of cast iron, and the water stop surface is inlaid with copper alloy or stainless steel and other corrosion-resistant materials with strong corrosion resistance, which is especially suitable for sewage or sea water environment. 3.Where there are special requirements, nickel chromium alloy cast iron and other materials with stronger corrosion resistance can be used.

EXPERIENCE OF PENSTOCK 1.Jinbin had started the research and produce the penstock since 2004 and there are normal size cast penstock and all size of steel penstock. 2. Cast penstocks are used for many domestic projects, such as Tianjin port rain and waster water pump station, Panjin First sewage water treatment, Tianjin drainage management project and China Metallurgical Group corporation sewage water treatment etc. 3.Steel penstocks are used for Heze Hongyuan water supply project, Bruneian sewage water treatment and Tangshan Joy fishing vallay project in 2016 etc. 3.All penstocks got the accept from the end users and no complaints.

The sluice gate is widely used in the pipe mouth where the medium is water (raw water, clean water and sewage), the medium temperature is ≤ 80 ℃, and the maximum water head is ≤ 10m, the intersection kiln shaft, sand settling tank, sedimentation tank, diversion channel, pump station intake and clean water well, etc., so as to realize the flow and liquid level control. It is one of the important equipment for water supply and drainage and sewage treatment. Wall type penstocks is used in inlet and outlet of wall for open or close, and use anchor bolts to fix the penstock to the hole surface.

1.The sluice gate valve for water is controlled by a mechanically operated spindle. 2.The square penstocks valve can be operated automatically through the use of an actuator. This could be activated once specific set levels are reached. Therefore, removing the need for any human interaction. 3.The welding penstock valve valve also seal a pipe on all 4 sides, this is something that stoplogs are unable to do.

1.This sluice gate valve is a type of valve for controlling water or sewerage. 2.This Channel type penstock is, in essence, a sliding door which can be operated by hand or an actuator （AUMA&Rotork&Festo） 3.This big size sluice gate valve raises to open and allow the passage of water and lowers to isolate the flow. 4.The whole rising stem on this WCB sluice gate valve can stand wear and tear, and every rising stem we also provide the Stem protection sleeve.

Non-rising stem knife gate valve have a stem nut on the disc,when turn the stem by hand,the disc will go up and down with the stem nut,this design used where the installation space is limited. We have some large diameter knife sluice gate valve body in stocked,so we can provide short lead time for our customers. All the flange knife gate valve will tested one by one before shipping,test according to API598 GB/T13927 ext. Body test 1.5*PN,seal test 1.1*PN, if the knife gate valve is bi-directional, then we will test two side of seal.

EXPERIENCE OF PENSTOCK 1.Jinbin had started the research and produce the penstock since 2004 and there are normal size cast penstock and all size of steel penstock. 2.This manual sluice gate valve are used for many domestic projects, such as Tianjin port rain and waster water pump station, Panjin First sewage water treatment, Tianjin drainage management project and China Metallurgical Group corporation sewage water treatment etc. 3.This Water sluice gate valve are used for Heze Hongyuan water supply project, Bruneian sewage water treatment and Tangshan Joy fishing vallay project in 2016 etc. 3.All penstocks got the accept from the end users and no complaints.

1.This stainless steel sluice gate valve is used for controlling water or sewerage. 2.TEST EQUIPENT Test equipment for all size to make sure the product quality. 3.MAIN PRODUCTS The main products are water valves, such as cast iron gate valve, butterfly valve, , penstock, etc ductile iron and cast steel,and stainless steel.