wafer ductile iron Knife Gate Valve
- THT
- China
- 30 Days
- 200
Non-rising stem knife gate valve have a stem nut on the disc,when turn the stem by hand,the disc will go up and down with the stem nut,this design used where the installation space is limited.
We have some large diameter knife sluice gate valve body in stocked,so we can provide short lead time for our customers.
All the flange knife gate valve will tested one by one before shipping,test according to API598 GB/T13927 ext.
Body test 1.5*PN,seal test 1.1*PN, if the knife gate valve is bi-directional, then we will test two side of seal.
wafer ductile iron Knife Gate Valve
The Grooveless knife gate valve is also called bidirectional sealing knife gate valve. The ductile iron valve body adopts integral structure knife gate valve, including valve body, disc and U-shaped sealing strip. The left and right sides of the valve body and the bottom of the middle cavity are provided with grooves and elastic U-shaped sealing strip. When the valve is closed, the disc moves down, The bottom edge of the ram contacts with the sealing strip, and the sealing strip is compressed into the groove to realize the sealing of the valve body and the ram; When the knife gate valve is opened, the ram moves up, the bottom edge of the ram is separated from the sealing strip, and the sealing strip springs up and the groove is flat, which can prevent the medium sediment from depositing in the groove of the middle cavity of the valve body during the use of the knife gate valve, which is not easy to block and has no residue, and the pipeline is easy to clean, so as to effectively improve the sealing effect of the knife gate valve and prevent leakage when the valve is closed.
| Suitable size | DN50-DN1000 |
| Suitable pressure | DN50-DN100 16bar DN125-DN200 14bar DN250-DN300 12bar DN350-DN400 10bar DN450-DN550 8bar DN600-DN650 5bar DN700-DN750 4bar DN800-DN900 3bar DN1000 2bar |
| Suitable temp. | -10-120°C |
| Suitable fluid | Mud, urban sewage treatment, sugar factory, powder, papermaking, medicine, chemical industry, food and other fields |
| Connection | PN10, PN16 wafer |
| Operation | hand wheel, electric actuator, pneumatic actuator |
| Body material | Ductile iron |
| Disc material | SS304 |
| Seat material | NBR / EPDM |
| Stem material | 2Cr13 |
Tianjin Tanggu Jinbin Valve Co., Ltd. was founded in 2004, with registered capital of 113 million yuan, 156 employees, 28 sales agents of China,covering an area of 20,000 square meters in total, and 15,100 square meters for factories and offices.It is a valve manufacturer engaged in professional R&D, production and sales,a joint-stock enterprise integrating science, industry and trade.
The company now has 3.5m vertical lathe, 2000mm * 4000mm boring and milling machine and other large processing equipment, multi-functional valve performance testing device and a series of perfect testing equipment such as physical.
