Sluice Gate Penstock Valve
- THT
- Tianjin
- 4-5weeks
- 1000pcs/month
1. Generally, the Sluice Gate Valve is equipped with adjustable wedge tightening device, and wedge blocks (such as wedge and wedge, wedge and eccentric pin, etc.) are respectively set on the body and door frame.
2. By adjusting the wedge clamping device, the body can be close to the frame when the penstock valve is closed, so as to meet the water stop requirements.
3. Sluice Gate Valve is usually equipped with manual or electric actuator or gear hoist to operate the Sluice Gate Valve.
Sluice Gate Penstock Valve
This Sluice Gate Valve used for controlling water or sewerage,
This penstock valve is 4-seal(bass), a unidirectional seal.
1.Diameter: DN600
2.Size range：100mm-6000mm
3.Pressure: 1M-20M water pressure
4.Medium: water,sewage
5.Tem: ≈80℃
A:Anchor bolt installation
B:Cement pouring
| Main Material | |
| Body&Disc | Ductile cast iron |
| Seal | Brass |
| Stem | 2Cr13 |
| Material Range | |
| Body&Disc | cast iron, Ductile cast iron, stainless steel |
| Seal | Brass,EPDM,Rubber |
| Stem | 2Cr13, SUS304, SUS410,SUS316 |
