Welding Process SS304 SS316 Flap Valve
- THT
- China
- 10
- 3000
Welding process SS304 SS316 flap valve Cast iron square falp gate valve with square type, metal seat, non-return, flange end falp valve, produce process is casting.
Welding process SS304 SS316 flap valve
Welding process SS304 SS316 flap valve is installed at the end of the drainage pipe to prevent outside water from ingress. Materials are divided into stainless steel, cast iron, section steel, composite materials (glass reinforced plastic) and other materials.
There are many types of shutter doors, such as floating box type shutter doors, flat type shutter doors, sleeve type shutter doors, etc.
Welding process SS304 SS316 flap valve is a one-way valve installed at the outlet of the drainage pipe by the river. When the tide level of the river is higher than the outlet of the water outlet and the pressure is greater than the pressure in the pipe, the door panel is automatically closed to prevent the river tide from pouring into the drainage pipe.
Size: Customization size
Working pressure:Water head:5M
1. Installed on the wall or the end of pipe by secondary concrete
2. Installed on the wall or the end of pipe by fasteners & expansion anchor & sealant
| NO. | Name | Material |
| 1. | Frame | SS316, SS304 |
| 2. | Gate | SS316, SS304 |
| 3. | Seal | EPDM, PTFE, NBR |
| 4. | Hinge | 2Cr13 |
Welding process SS304 SS316 flap valve
Welding process SS304 SS316 flap valve
