Electric Damper For Flue Gas

Electric Damper For Flue Gas

The Electric Damper For Flue Gas is generally suitable for industrial, metallurgical, environmental protection, chemical, building materials, power station, glass and other industries in the dust containing cold air or hot air gas pipeline in the ventilation and environmental protection engineering, as a gas medium to adjust the flow or cut off the pipeline control device. Electric Damper For Flue Gas should be installed horizontally in the pipeline.

The structure of Electric Damper For Flue Gas is welded by using the center line butterfly plate and short structure steel plate, so there are no connecting rod, bolt and other components in its internal part, so there will be no component problems in the use process, so the failure rate is very low. 

Because there is a large gap between the butterfly plate and the valve body of the Electric Damper For Flue Gas, there is enough expansion space, so in the process of use, it can effectively prevent the thermal expansion and cold contraction caused by the temperature change, and the butterfly plate will not be stuck.

Because of the wide selection of materials, this kind of Electric Damper For Flue Gas also has the characteristics of high temperature resistance, there will be no friction when opening and closing, and the service life is extremely long.

1. Manufacture is according to JB/T8692, and the face to face dimension is according to GB12221.

2. After assembly, test start-up and shut-down operation, which requires flexible operation and no obstruction phenomenon for many times.