Electric Flue Gas Louver Damper
- THT
- Tianjin, China
- 25 days
- 2000
Fit anywhere in ducting
Compact, no bonnet, little external clearance needed.
Lightweight
Drive and linkage more readily accessible
Control function simple with opposed blades.
Low leakage to outside environment.
Good modulation and control characteristics.
Electric Flue Gas Louver Damper
The Electric Flue Gas Louver Damper consists of several blades mounted parallel across a duct, with centrally pivoted shafts extending out through a frame and driven by a linkage.The drive for Electric Flue Gas Louver Damper are simple, needing only 90° of motion. The torque requirement can vary widely over damper life, if corrosion and thermal effects are severe. Electric motors, air cylinders, and oil cylinders are able to actuate louver dampers with little difficulty.
Suitable medium: Air, flue gas, dust gas, combustible gas
Working pressure：0.1Mpa, 0.2Mpa， 0.25Mpa
Suitable temperature: ≤450℃
Size:
500x400-3000x3000mm
| Body | Carbon steel |
| Disc | Carbon steel |
| Stem | 2Cr13 |
| Operator | Electric actuator |
